FFConfigLite

Perform diagnostics and configuration for modules in the Ford Focus 2 and C-Max I.

Connect to your Ford Focus 2 or C-Max using an ELM327 or ELS27 adapter to access modules on the CAN-bus, including:

Engine Control Unit: View module information, read and clear error codes, reboot the module, and reset long-term fuel trim (KAM)* for:

ESU-411/418 (1.8L 125HP / 2.0L 145HP)

SIM28/29 (1.4L 80HP / 1.6L 100/115HP)

ESU-121/131 (1.8L 120HP / 2.0L 145HP).

Instrument Cluster: View module information, read and clear error codes, configure settings, reboot the module, change the mileage unit, and perform mileage correction*.

-Brake Control Module: View module information, read and clear error codes, configure settings, reboot the module, reset DDS calibration, and perform brake system bleeding*.

-Comfort Module: View module information, read and clear error codes, configure settings*, and reboot the module.

-Safety Module (Airbag): View module information, read and clear error codes, configure settings, reboot the module, and reset crash data*.

-Transmission Control Module: View module information, read and clear error codes, and reset KAM*.

-Climate Control Module: View module information, read and clear error codes.

-Audio Module: View module information, read and clear error codes, and retrieve the radio code (for M series units)*.

*-These features are only available in the full version.

To unlock the application's full potential and access more vehicle modules, a simple modification to your ELM327 adapter is required.

Configure the adapter's switch as detailed here:

Http://forffclub.narod.ru/index/0-2

You can purchase an ELS27 adapter at: https://els27.ru/. For ELS27USB, set the baud rate to 38400. For ELS27BT, use a rate of 2,000,000 via the ELS27 Baudrate utility.

Screenshot